A portable ramp that folds flat and goes anywhere
Steps, doorways, and raised thresholds become genuine obstacles when you are using a wheelchair, scooter, or mobility aid. This aluminium ramp folds in half for compact storage and transport, then unfolds flat to bridge a height difference of 17 to 45 cm — recommended for 17 to 30 cm for the most stable crossing angle. The ribbed surface texture runs across the full width, providing grip in both wet and dry conditions. Raised side rails along both long edges help prevent accidental roll-off. At 183 cm long and 72 cm wide, it gives a stable, wide crossing surface for wheelchairs and scooters alike. A chain latch keeps it safely closed when folded for transport or storage.
- Folds In Half: Locks with a chain latch for compact, safe storage and easy transport in a car boot.
- Anti-Slip Ribbed Surface: Full-width texture provides grip for wheels and tyres in wet and dry conditions alike.
- Raised Side Rails: Run along both long edges to prevent accidental roll-off during crossing.
- 183 cm Length: Bridges step heights from 17 to 45 cm across doorways, steps, and vehicle thresholds.
- Aluminium Alloy Construction: Corrosion-resistant and lighter than steel equivalents — practical for regular transport.
Bridging the gap, wherever it appears
Steps, raised doorways, and uneven thresholds present real barriers for wheelchair and scooter users. This folding aluminium ramp spans 183 cm to bridge height differences between 17 and 45 cm, with a recommended range of 17 to 30 cm for the most stable crossing angle. The ribbed surface provides grip across the full width in wet and dry conditions, and raised side rails along both long edges add a meaningful layer of security against accidental roll-off. It folds in half along a central hinge and locks with a chain latch for safe transport and storage.
Practical dimensions and portability
At 183 cm long and 72 cm wide, the crossing surface is generous enough for standard wheelchairs and mobility scooters. The aluminium alloy construction is lightweight relative to steel alternatives and resists corrosion over time. Suited to home doorways, vehicle access points, steps at public venues, and temporary access needs at events or workplaces.
A note on installation
No permanent fixing is required — the ramp rests in place under load. Always verify that the step height falls within the 17 to 45 cm applicable range before use. The chain latch holds the ramp closed during transport but is not a structural lock when in use.












