Quiet-Close Cabinet Door & Drawer Dampers — 25-Pack
These grey-blue ABS plastic dampers slow the closing action of kitchen cabinet doors and drawers, absorbing impact and preventing loud bangs. Each unit is approximately 52 mm long and mounts to the top, bottom, or side of a door or drawer with two included cross-head screws. The piston-style mechanism engages gently as the door closes, keeping the action quiet through repeated daily use. These are designed for doors and drawers weighing no more than 8 kg — heavier panels will need two or more dampers per door. The 25-pack covers a full kitchen or multiple rooms in a single order.
- Soft-Close Piston Action: Slows every cabinet door before it meets the frame, eliminating slamming noise and protecting hinges from repeated impact.
- Versatile Mounting: Fits top, bottom, or side of any door or drawer panel — no special routing or recessing needed, just two screws per unit.
- 25-Pack with All Fixings: Covers a full kitchen in one order; 50 cross-head screws and a screwdriver are included so you can start immediately.
- ABS Plastic Build: Resists moisture and everyday cleaning products, keeping the grey-blue finish intact inside closed kitchen cabinets.
- Light-Door Rated: Designed for doors and drawers under 8 kg; use two or more dampers on heavier panels for the same quiet-close result.
Soft-Close Dampers for Kitchen Cabinets and Drawers
[IMAGES]Practical Details
The piston mechanism engages just before the door meets the frame, cushioning the final motion. Each damper is rated for doors and drawers up to 8 kg; use two or more on heavier panels. Screw holes are pre-drilled in the base plate for straightforward installation.
What's in the Box
What's included
These grey-blue ABS damper buffers slow the closing action of kitchen cabinet doors, drawer fronts, and furniture panels, absorbing the impact that causes slamming and rattling. Each unit is approximately 52 mm long and mounts to the top, bottom, or side of a door with two cross-head screws.
This pack includes 25 soft-close dampers, 50 cross-head screws (two per unit), and one black cross-head screwdriver. No special tools or routing are needed.
















