Add a Vintage Glow with a Tiffany-Style Stained Glass Light
A semi-flush ceiling light with an inverted dome shade in orange, amber, and white stained glass panels divided by dark lead-style lines. The shade hangs from three antique brass chains fixed to a round ceiling plate, and the warm tones of the glass cast a soft, patterned glow when lit. Three E27 bulb sockets inside the dome allow for practical room illumination alongside the decorative effect. Bulbs are not included — warm-white E27 bulbs complement the glass colour palette. The antique brass finish runs consistently from ceiling plate to chain to the decorative base finial.
- Stained Glass Shade: Orange, amber, and white glass panels with yellow diamond accents cast a warm, patterned glow when lit.
- Three E27 Sockets: Three bulb sockets inside the dome ensure sufficient light output for a living room or dining space.
- Antique Brass Finish: Chains, ceiling plate, and base finial share a consistent antique brass finish throughout the fitting.
- Semi-Flush Chandelier: Suspended on three chains from a round ceiling plate for straightforward ceiling rose installation.
- Bulbs Not Included: Choose E27 warm-white bulbs at the wattage specified on the fixture's rating label to suit the glass tones.
Tiffany Stained Glass Ceiling Light
An inverted dome shade in orange, amber, and white stained glass panels, suspended on three antique brass chains from a round ceiling plate. Three E27 sockets inside the shade distribute light evenly across the room. The dark lead-style lines between glass segments are characteristic of the Tiffany style, casting a warm, patterned glow when illuminated. Bulbs are not included.
[IMAGES]Shade Details
- Orange and amber upper panels with white geometric lower panels
- Yellow diamond accent pieces at junctions between sections
- Dark lead-style dividers throughout
- Antique brass chains, ceiling plate, and base finial
- Three E27 bulb sockets
Installation Notes
This fitting requires ceiling rose wiring. The mounting plate is round; ensure your ceiling can support the combined weight of the fitting and three bulbs. E27 bulbs are not included — check the fixture's rating label for the maximum wattage. A qualified electrician should carry out the wiring to meet Part P building regulations.












