End Wardrobe Clutter with a Hanger That Does Both
Most belts and ties end up in a drawer until they are creased beyond rescue. This wooden hanger gives both a proper home on the wardrobe rail, within reach every morning. The natural wood bar has a smooth lacquered finish and sits on a single chrome swivel hook that rotates 360 degrees on any standard wardrobe rail. Fourteen chrome swivel hooks run along the underside — enough for a full collection of belts and ties without doubling up — and each hook rotates independently so you can reach the one you want without dislodging everything else. The double-sided layout puts seven hooks on each face, practical for keeping belts and ties on separate sides. Dimensions are 35 × 12 ×
- 14 Chrome Swivel Hooks: Fourteen independently rotating chrome hooks give each belt or tie its own slot, accessible without pulling adjacent items out of position.
- Natural Wood Bar: Smooth-lacquered schima wood in a warm natural finish that integrates with any wardrobe interior rather than looking like utility storage.
- 360° Rotating Top Hook: The single chrome swivel hook at the top rotates fully on any wardrobe rail, giving access to items at the back without removing the hanger.
- Double-Sided Hook Layout: Seven hooks on each face of the bar — use one side for belts and the other for ties to keep them separated and visually sorted at a glance.
- Compact 35 × 12 cm Footprint: Takes up the rail space of one jacket hanger while holding a full collection of belts and ties without doubling items per hook.
One Hanger for Every Belt and Tie in Your Wardrobe
The natural wood bar holds 14 chrome swivel hooks along its underside — seven on each face in a double-sided arrangement. Each hook rotates independently, so you reach for one item without pulling others out of position. The wood has a smooth, lacquered finish in a warm natural tone that integrates with any wardrobe interior rather than looking like a utility rail.
360° Rotating Top Hook
The single chrome swivel hanger hook at the top rotates fully on any standard wardrobe rail, letting you spin the hanger to reach items at the back without removing it. Fits standard hanging bars, clip-ring rails, and pull-out wardrobe sections without modification.
Compact Dimensions
At 35 × 12 × 1.2 cm, this hanger takes up the same rail space as a standard jacket hanger. It will not crowd adjacent clothing or push into neighbouring hangers when the wardrobe is full.





















